Last week we gave you the rundown on our wireless DIY home security system search and selection process. After much deliberation and research, we decided to purchase the 2Gig Go!Control system to meet our needs. It seemed to offer the best combination of features, capabilities, aesthetics, and price.

Before I bore you with the details of our install, there's a major question at the end of this post that we need all of you to weigh in on. So even if you don't care at all about this awesome topic, please check out our big debate.

A few days after placing the order, I eagerly awaited the arrival of my box o'goodies. I don't care what it is, if it's a technology item and I ordered it, I get a little bit of nervous anticipation before it arrives. When the box showed up at our door I eagerly tore into its contents like a nerdy kid on Christmas.

This happens to be one of those projects that we've put off for years. We've been talking on and off about a new system since our old one had its first problems back in 2006. But as much talking as we did, we never actually pulled the trigger. To be totally honest, I'm glad we hadn't. Waiting has allowed the technology to come up to speed with the smartphone world, while the hardware has gotten lower profile and better looking. Once the box arrived at our house, well, it got real.

The project quickly moved from concept to reality, and it was up to me to make sure the box didn't sit in the basement collecting dust like so many other projects we'll get to "some day."

Rather than wait, I took the bull by the horns and started configuring our system right away.

The install of the system seemed pretty straight forward from the quick start guide, but I knew there'd be quite a bit of configuration necessary. The manual suggested I install each sensor and device in its intended location, then install the panel, configure and test everything. But I knew that would be a huge pain with a lot of running around the house while doing each step.

Instead, I sat everything down first on the dining room table (which made Wendy less than happy), then on the coffee table and started to work through everything while sitting in the comfort of our couch (which oddly also made Wendy not happy...hrm).

This also allowed me to take my time with the configuration and not worry about taking the old security system down until the new one was ready to go.

The first step was to install the items I'd need in the main panel. While the main panel comes with the basic items necessary, adding a cellular module for 3G communication with the monitoring agency and the 900mhz module for communication with the additional touchscreen panels had to be done before I got started. I'm sure or can look intimidating, but it was actually quite straight forward.

I just had to plug both modules into their designated areas on the panel's circuit board.

There's also a sticker that comes with the cellular module that shows all of it's pertinent serial numbers and other items that you'll want to stick inside your panel for easy reference.

The next step in getting the system running was to connect power to the panel. Each panel comes with a small adapter plug but no wire to connect each item. This makes sense since the amount of wire each person will need varies significantly. Luckily, I had some 18ga copper thermostat wire in the basement that would work perfectly. I grabbed the wire and my wire strippers and connected the first adapter to the panel.

In order to keep everything straight I opened my laptop and started a Google Doc spreadsheet, and I grabbed our label maker.

To configure, the system, I'd need to designate each sensor along with its intended location in our home. But since they all looked the same, I'd need something to differentiate each one so I'd know where to install it. This is where the labeler came into play. As I got to each component I'd print out a label and stick it on the case to tell me where it's final home will be.

After labeling the device, I'd move into the spreadsheet and enter all of the information about the device. I'd collect name/location, device type, serial number, etc.

Once everything was recorded I'd start to configure the device for use in the system. There's a system configuration screen in the main panel that allows you access to the portion of the software to manage all of your system components. It's here that you define the sensors, system name, how it should act in the system (as a window sensor, as a entry/exit sensor, as an non-alarmed sensor, etc), and all of the other minor details. The install guide walks you through each element and you perform all configuration through the keypad on the panel.

This is not the fastest process in the world, but once you get used to it, it probably takes about five minutes per device you're adding to the system. But with everything sitting on the table in front of me I could add the device, test it, and record it in my spreadsheet without having to run around the house and make sure everything was functional.

Pairing all of the devices with the panel was easy due to the "learning mode" of the system. When I had a device ready to pair, I'd just enter learning mode and then hit a button somewhere on each device, which would then send a signal back to the main panel.

When I felt I had all of the various items configured in the system all sitting on our coffee table, I moved onto the panel install phase. The key for this step is to select a central location in the house where the panel can effectively communicate with all of the various sensors and panels throughout the house. Since the 2Gig main panel is also a control panel, there is some initial thought that it should go near one of the doors in the house, but that wouldn't work for our house like it would for a more traditional home with a centered front door and more traditional layout.

Instead, we opted to install our panel where our previous system's panel was installed, as we knew the previous panel was able to communicate with its system sensors in all rooms of the house.

Install of the panel is straight forward. It just requires a few screws to attach the back plate, followed by wiring up the panel to its permanent power source. We used a spare plug in the basement where our old system has been plugged in, but if we had wanted to, we could have run the wire a pretty major length to any outlet in the house. Luckily we just used the small wire and sort of tucked it away and out of sight. Eventually we'll likely run the wire in the wall to totally conceal it.

One thing I liked about this system was the little handle strap attached to the main panel that hangs over the mounting plate. This allows you to place the panel where it will need to go, but also let's you work on attaching wires and other items with both hands, rather than juggling.

Check out our new panel's sleekness vs our old control unit's oldness.

When I was satisfied with the panel I moved onto the next major step, install of the sensors. Using the labels I attached to each sensor as my guide, I just walked from location to location and stick them in place. Though they all come with screws if you'd like to mount them that way, two foam adhesive strips come with each sensor. Since the adhesive for our original sensors were still holding strong all these years later, and the 3M strips are widely available for future replacement of needed, I just went ahead and stuck each one in place.

After all of the window/door sensors were in place, I screwed the smoke, glass break, and motion sensors into their various locations.

And finally, I placed our various touchscreen panels in their temporary resting places. I say temporary because their final locations haven't been determine as yet, especially for one in particular, our bedroom panel.

Actually, this single solitary aspect of our alarm system has caused some rather heated debate in our home. I'd be lying if I said we'd not reached the point of temporary silence during our discussions. The simple fact is, it all comes down to a basic differing of opinion. The main difference, we think the both think other's opinion is wrong and based around solidly flawed logic.

We both agree that we want alarm panels at the front and back doors of the house, that's a no-brainer. The third panel, in or near our bedroom is also a known item. However, the the question is entered when it comes to actual panel placement in or near the bedroom.

One of us feels strongly that the panel should be placed on the wall in the bedroom proper, showing off the glorious technology and making access to the panel at any time quick and easy. It will be mounted in an inconspicuous area but will add clutter to the wall, will require us to fish a wire from the attic and put a hole behind the panel, and may add unwanted noise/light in the room with voice announcements.

The other person feels the panel should be tucked away in the bathroom closet, out of sight. The panel will still be accessible in the bathroom closet, but running the wire will be simplified as there is already a power source in there. This will also reduce the possible clutter on the bedroom wall, and will remove the risk of light/noise in the bedroom. The primary drawback, it's not right there on the wall and you'd need to go out of your way to check the status of the system, arm/disarm, or call for emergency help.

So, the big question: What should we do with this 3rd touchscreen expansion panel? Team Bedroom Wall and Team Bathroom Closet, sound off!

Next time I'll fill you all in on the monitoring station/company selection, and what sold us on the service. I'll also walk you through the process of setting your system to communicate with the monitoring service, and show you some of what you get with the service we choose.

But until then, what do you think about the 3rd panel? Should it go on the wall in the bedroom behind the door, or tucked away in the bathroom closet? And since I didn't tell you which of us wanted which option, can you guess who is on Team Bedroom Wall, and who is on Team Bathroom Closet?

Comments 32


3/7/2014 at 12:54 PM

Wall! I'm definitely going to have to go back and read these posts, as I really want a new system. Looking forward to the update post in a few months too!

3/7/2014 at 1:33 PM

Team Wall. We currently do not have a panel in our bedroom, but we have a "monitor" that alerts us when the garage door is opened or closed. I did have to get use to the noise & light from the monitor, but I prefer it in the room, than a closet. I can easily to a quick look at the monitor before jumping in bed. Team Wall!

3/7/2014 at 2:06 PM

Love the tone at the end. As though we can't tell who wants that panel in the closet? I think it should go in the bedroom. What is the use in having it in a closet if its purpose is to help you monitor the system? You can't do that if it's in the closet! Having said that, I congratulate you on setting up your own system and doing it so smartly.

3/7/2014 at 2:10 PM

team closet. i'm sensitive to light "noise", and i would want less wall clutter. i mean, it's still easy to get to in the closet, right? and, um, people go in their master closets all the time (usually at LEAST once a day). and you would still hear the alarm from the closet if something was really wrong, right? good luck either way. and i'm guessing that alex is team wallAlt smile

3/7/2014 at 2:31 PM

Team Closet!

My guess is Wendy is Team Closet and Alex is Team Wall.

3/7/2014 at 3:02 PM

Your post says Bedroom Closet, then Bathroom Closet. I'm team Bedroom Closet.

3/7/2014 at 3:03 PM

Oops, fixed (or I misread). Still: team closet.

3/7/2014 at 3:13 PM

I'm curious as to two aspects of the system, apologies if they were already answered. Obviously the 3g requires an account/service, is it as much as a regular cell plan? and who would you get the plan through? Do the sensors require batteries?

3/7/2014 at 3:14 PM

oh, forgot. Team bedroom wall, so that you can be notified if something happens in the middle of the night, etc.

3/7/2014 at 3:19 PM

Team closet. Imagine how that lovely exciting new beautiful sleek technological panel will look in 10 or 20 or 30 years. Just like the old one looks to you now!

3/7/2014 at 4:19 PM

I knew reading the headline what the problem was. I'm assuming Wendy wants it on the bedroom wall & Alex wants it in the master bath closet - NOT! I've never had an alarm system so I'm going to try to think logically about it - but my gut feeling is bedroom wall, then master bath wall and lastly master bath closet.

1 - If something were to happen in the middle of the night how easy would it be to get to the panel and determine the problem or hit the panic button? This is especially critical if you don't function well when awakened abruptly.

2 - How much light does the panel emit when nothing is happening? You really should not have any lights in the bedroom for optimal sleep.

3 - I don't remember you having that much available bedroom wall space - will the panel be "in your face" or will it fade into the background?

Can't wait to see what you do!

3/7/2014 at 4:20 PM

Is there a bedroom closet? That seems like it would be perfect. If not, hide it behind the bedroom door where it'll be out of sight most of the time.

3/7/2014 at 4:35 PM

Team Closet (aka team Wendy)

3/7/2014 at 4:50 PM

I would not want anything glowy on any bedroom wall. So, team Wendy (I suppose).
If you're really worried about the bathroom closet being too inaccessible, why not put it in your bedroom closet, as some other people also suggested? I'd also like to know what the panel actually does, how much constant access/visibility is actually necessary?
I totally get the geeking out about new hardware, but the appeal for me often is how inconspicuous it can be (I love how you managed to wire your whole house to create a pretty much invisible audio system), and sticking it right there on a wall in an otherwise peaceful and carefully designed bedroom kind of defeats that purpose.

3/7/2014 at 6:56 PM

Team closet - no way would I want a control panel as a decorative item in my bedroom (sorry Alex). Is it possible to monitor using your phone app? You can have your phone by your bed and then there is no need for a visual line to the control panel - just a thought. Cheers

Kelly H.
3/7/2014 at 8:12 PM

Definitely the closet, due to the light and/or noise the control panel might emit. Nobody needs that!

3/7/2014 at 11:31 PM

Wall. Think emergency. I would want it readily accessible. I know that in an emergency you will need to act fast and being in the bedroom you might also be asleep when the need arises.

BTW how is the doggie?????

3/8/2014 at 11:04 AM

Hi, Why don't you take an alarm clock and set it for a time that will really piss you off when it rings, then put it in those two locations and both can decide. No fair using a clock that can be shut off with any tech device. This is to get you up and out!jd

3/8/2014 at 11:19 AM

Being lazy, I'd want it as close to bed as possible. You could always cover it with something like a shadowbox frame that could be hinged to open for access to the panel, but cover it with something decorative when not in use to contain noise and light. Guessing Wendy wants it in the closet?

3/10/2014 at 8:59 AM

This is kind of what I was thinking. Either decorate-disguise it or mount it low on the wall close to the bed--somewhere that you can see and reach it in an emergency but where it wouldn't detract from the aesthetic of the room. With all the clever stuff you two have come up with, I'm sure you can find a good solution to this wall wart issue!

3/8/2014 at 11:52 AM

Bedroom Wall, for sure. Yeah it adds wall clutter but accessibility is key, particularly in the middle of the night. If the problem is light, why not outside the bedroom on the wall? But definitely not in a closet.

3/8/2014 at 4:27 PM

I put ours on a lettle plate stand on a table in our room. Wires are behind that table and it is convenient and works great

3/9/2014 at 4:22 PM

I vote bedroom wall. Every night when we get into bed, one of us says: "Did you set the alarm?" All you have to do is sit up in bed and look at the alarm panel across the room. Red light = good = armed; green light = bad = someone has to get out of bed and set it. Wouldn't want to have to walk back into the bathroom closet every night to check.

3/10/2014 at 10:56 AM

I'm Team Wendy -er, I mean Team Closet. However, I do get the pros of having it more readily accessible. Someone mentioned a phone app - is that possible? If not, someone else mentioned hiding it behind some artwork - and THAT could be the subject of a future blog post. What about mounting it in the bedroom closet, sort of like the tv? You could open the door up before bed, so it is visible in the event of an emergency, and then close the door on that eyesore during the day....

3/10/2014 at 11:49 AM

I vote for the wall in the hallway just outside the bedroom door. That way it is close, centrally located to monitor the system, but the light and the noise could be blocked (if needed) by shutting the door.

3/10/2014 at 12:11 PM

Wall. In an emergency, you want it to be accessable. I only have a single panel, though, and it's all the way in the living room. But I have a very small house and when the thing goes off, it sounds like it's right by the bed.

Luckily, the only time it's gone off has been the CO2 monitor in the basement and it was a false alarm, though it scared the bejeus out of us.

Laura C
3/10/2014 at 1:11 PM

Team Closet/Wendy. Unless you're in a super-dangerous neighborhood or elderly and in danger of breaking a hip on your way out of bed, no need to clutter up the bedroom wall with that thing.

3/10/2014 at 2:43 PM

It has been a couple of days. You may have already made the final determination, but I would say wall, but disguise it.

3/10/2014 at 4:13 PM

I always wanted to be able to install such things by myself but I always do something wrong and as a result I have to call for the professional. Your instruction is rather detailed. I will try to follow.

3/11/2014 at 4:27 PM

I guess I'm team wall too. But have you considered putting it in the hallway? That way it's still easily accessible and close to the bedroom, but not actually in the bedroom. I think growing up the security panels were outside my parents' bedroom.

2/9/2015 at 2:37 PM

Great series of posts! Would you be able to outline what hardware you purchased and where you placed it? Apologies if this is noted somewhere and I missed it. Thank you.

Since you've not signed in yet, you will need to fill in your name and email below. If you have a Facebook account, save yourself a step and use Connect to login.

Denotes a required field.

Please enter full URL, including http://

You can use Markdown syntax in your comment. And you can also use lots of Emoji!
  • Search

  • Login
  • Follow
  • Advertising

If you're looking for information on advertising and sponsorships, head on over to our sponsorships page. You can purchase site sponsorships in a few easy clicks. 

Toolbox Tuesday
Open Housing
  • We're Featured!

Old Town Home has been featured in the following places and publications:

The Washington Post
Washingtonian Magazine
Old House Journal
Apartment Therapy House Tour
Washington Post Express Feature
Home & Garden Blogs
© 2024 - Privacy Policy
Login Below
Sign in with Facebook

Unexpected Error

Your submission caused an unexpected error. You can try your request again, but if you continue to experience problems, please contact the administrator.